Astrolab Surge
Protector Adaptor Test Results
Our
Surge Protection Adaptors were tested
by an independent laboratory to
the following requirements:
-
MIL-STD-1399,
Section 300A, Figure 2 (1,000
volt impulse strike)
-
ANSI/IEEE C62.41-1991, para.
9.12, Category B3 (.05 µsec,
100 Hz Combination Wave,
6 KV peak volts, 500 amp
peak current)
-
ANSI/IEEE
C62.41-1991, para. 9.11, Category
B3 (.05 µsec, 100 Hz Ring Wave,
6 KV peak volts, 500 amp
peak current)
|
